Our Products

Tru-Bore® Pulled Tee

Tru-Bore® pulled tees are a type of fitting that is used to form a branch off a piping system.

Tru-Bore® pulled tees can either be equal or reducing. An equal tee means that the branch diameter is same as the main pipe, while a reducing tee has two outlets that cut at 90° to the main run pipe.

Typically, the stainless steel Tru-Bore® pulled tees that Special Metric Materials supplies are manufactured to EN 10253-4/EN 10253-3. Tru-Bore® pulled tees manufactured to EN 10253-4 have a weld factor of z=1 & are rated to a higher pressure capability.

Special Metric Materials can supply Tru-Bore® pulled tees in the following Grades: 304L (1.4307), 316L (1.4404) & 316L High Moly (1.4432).

Tru-Bore® is a registered trademark of OSTP. 

Technical information

Please Click on image for an enlarged view

Make an Enquiry

I would prefer to be contacted by..

Download Brochure