Tru-Bore® Pressed Tees

Tru-Bore® pressed tees are a type of fitting that is used to form a branch off a piping system. It has a permanent press joint.

Tru-Bore® pressed tees are always equal. An equal tee means that the branch diameter is same as the main run pipe.

Typically, the stainless steel Tru-Bore® pressed tees that Special Metric Materials supplies are manufactured to EN 10253-4/EN 10253-3. Tru-Bore® pressed tees manufactured to EN 10253-4 have a weld factor of z=1 & are rated to a higher pressure capability.

Special Metric Materials can supply Tru-Bore® pressed tees in the following Grades: 304L (1.4307), 316L (1.4404) & 316L High Moly (1.4432).

Tru-Bore® is a registered trademark of OSTP.