Special Metric Materials stocks ANSI plate flanges. A plate flange is a flat disc that can be welded or fixed to a pipe’s end that allows it to be bolted to another pipe. Sometimes, two plate flanges are bolted together with a gasket in the middle. ANSI plate flanges are often used in water and chemical, steam and condensate pipelines.

Special Metric Materials stocks ANSI plate flanges in accordance with EN1092-1.

ANSI plate flanges are available in a range of sizes, including custom fittings that can be manufactured to order.

Special Metric Materials has ANSI plate flanges readily available in stainless steel 304 and 316. Both welded and seamless fittings are available.

Special Metric Materials stocks ANSI blind flanges. ANSI blind flanges are solid discs that are used to block off a section of pipe or a nozzle in the pipeline that is not needed. They typically have mounting holes around the edge to attach them to the pipeline. They can be used on a permanent or temporary basis.

Special Metric Materials stocks ANSI blind flanges in accordance with EN1092-1.

ANSI blind flanges are available in a range of sizes, including custom fittings that can be manufactured to order.

Special Metric Materials has ANSI blind flanges readily available in stainless steel 304 and 316. Both welded and seamless fittings are available.

Special Metric Materials stocks a wide range of ANSI pipe in different sizes. These pipes are used in pipelines in a variety of applications such as chemical, steam and condensate.

Special Metric Materials stocks ANSI pipe in accordance with ASTM A403 and ASME B36.19 / B36.10.

Nominal size ANSI pipe are available from 1/8” to 24”, Sch.10s and Sch.40s. Larger and custom sizes can be manufactured to order.

Special Metric Materials has ANSI pipe readily available in stainless steel 304 and 316. Both welded and seamless fittings are available.

Special Metric Materials stocks ANSI short radius 90° elbows. ANSI short radius 90° elbows are where the radius of the elbow is 1.0 times the pipe diameter, i.e. equal or R = D.

Special Metric Materials stocks ANSI short radius 90° elbows in accordance with ASTM A403 and ASME B16.9 / B16.9.

Nominal size ANSI short radius 90° elbows are available from 1” to 24”, Sch.10s and Sch.40s. Larger and custom sizes can be manufactured to order.

Special Metric Materials has ANSI short radius 90° elbows readily available in stainless steel 304 and 316. Both welded and seamless fittings are available.

Special Metric Materials stocks ANSI end caps. ANSI end caps are used as the name suggests – to cap the end of a pipe. They provide a tight seal, and can resist chemicals, moisture and weather while stopping the flow direction of a piping system.

Special Metric Materials stocks ANSI end caps in accordance with ASTM A403 / A815 and ASME B16.9.

Nominal size ANSI end caps are available from ½” to 24”, Sch.10s and Sch.40s. Larger and custom sizes can be manufactured to order.

Special Metric Materials has ANSI end caps readily available in stainless steel 304 and 316. Both welded and seamless fittings are available.

Special Metric Materials stocks ANSI reducing tees. ANSI reducing tees are used to form a branch off a piping system, with two outlets that cut at 90° to the main run pipe. They can be used in chemical, steam and condensate applications.

Special Metric Materials stocks ANSI reducing tees in accordance with ASTM A403 and ASME B16.9.

Nominal size ANSI reducing tees are available from ¾ x ½” to 12 x 10”, Sch.10s and Sch.40s. Larger and custom sizes can be manufactured to order.

Special Metric Materials has ANSI reducing tees readily available in stainless steel 304 and 316. Both welded and seamless fittings are available.

Special Metric Materials stocks ANSI equal tees. ANSI equal tees are used to form a branch off a piping system, where the branch diameter is same as the main pipe. They can be used in chemical, steam and condensate applications.

Special Metric Materials stocks ANSI equal tees in accordance with ASTM A403 / A815 and ASME B16.9.

Nominal size ANSI equal tees are available from ½” to 24”, Sch.10s and Sch.40s. Larger and custom sizes can be manufactured to order.

Special Metric Materials has ANSI equal tees readily available in stainless steel 304 and 316. Both welded and seamless fittings are available.

Special Metric Materials stocks ANSI long radius 90° elbows. ANSI long radius 90° elbows are used to connect two pipes and change the direction of flow through a pipeline system. They can be used in chemical, steam and condensate applications.

Special Metric Materials stocks ANSI long radius 90° elbows in accordance with ASTM A403 / A815 and ASME B16.9.

Nominal size ANSI long radius 90° elbows are available from ½” to 24”, Sch.10s and Sch.40s. Larger and custom sizes can be manufactured to order.

Special Metric Materials has ANSI long radius 90° elbows readily available in stainless steel 304 and 316. Both welded and seamless fittings are available.

Special Metric Materials stocks ANSI eccentric reducers. An ANSI eccentric reducer has a smaller outlet that is off-centre to the larger end. This means it can connect pipes with Special Metric Materials stocks ANSI concentric reducers. An ANSI concentric reducer is used to attach pipes or tubes that are on the same axis, usually as a passage between dissimilar dimensional pressurised pipes.

Special Metric Materials stocks ANSI eccentric reducers in accordance with ASTM A403 and ASME B16.9.

Nominal size ANSI eccentric reducers are available from ¾ x ½” to 16 x 12”, Sch.10s and Sch.40s.  Larger and custom sizes can be manufactured to order.

Special Metric Materials has ANSI eccentric reducers readily available in stainless steel 304 and 316. Both welded and seamless fittings are available.

Special Metric Materials stocks ANSI concentric reducers. An ANSI concentric reducer is used to attach pipes or tubes that are on the same axis, usually as a passage between dissimilar dimensional pressurised pipes.

Special Metric Materials stocks ANSI concentric reducers in accordance with ASTM A403 / A815 and ASME B16.9.

Nominal size ANSI concentric reducers are available from ¾ x ½” to 24 x 20”, Sch.10s and Sch.40s. Larger and custom sizes can be manufactured to order.

Special Metric Materials has ANSI concentric reducers readily available in stainless steel 304 and 316. Both welded and seamless fittings are available.