An Equal Tee, sometimes known as a straight tee, is a fitting where the branch diameter is same as the main pipe (run pipe) diameter. This Equal Tee BSP Fitting is suitable for use in natural gas, LPG, hot and cold water, as well as many other applications.
A 45° Elbow is used to connect two equally sized metric pipes and change the direction of the flow. This 45° Elbow BSP fitting is suitable for use with natural gas, LPG, hot and cold water, as well as many other applications.
A 90° Elbow is used to connect two equally sized metric pipes and change the direction of the flow. This 90° Elbow BSP fitting is suitable for use with natural gas, LPG, hot and cold water, as well as many other applications.
Special Metric Materials can supply ISO stainless steel backing flanges in a variety of different coatings. These are all available from stock, with next-day delivery across the UK:
Bright zinc plated (BZP), Fusion bonded epoxy (FBE), Stainless grade 316L & 304L, Aluminium
Special Metric Materials can supply ISO stainless steel backing flanges in the following drillings:
PN16 reduced thickness, PN16 full thickness EN1092-1, PN10 reduced thickness 200-600 ml., ASA 150 & PN25, Table D/.
Stainless steel saddle pipe clips are traditional clamps that hold stainless steel piping systems securely in place. Stainless steel saddle pipe clips work by transferring the weight of the pipe to the chosen supporting surface.
Stainless steel saddle pipe clips are used extensively across many sectors, including the water, food & drink, building services, process industries, renewable energy and chemical industries.
Special Metric Materials has M10 boss stainless steel saddle pipe clips in stock. Our trusted supply chain means we can also source a variety of other fixings and sizes on a quick turnaround. Contact us today to discuss your project requirements.
ISO stainless steel pressed collars for Pressure Purposes are produced in accordance with EN 1092-1 / Type 37.
Dimensions and Tolerance of the ISO stainless steel pressed collars Special Metric Materials sources and supplies are in accordance with ISO 1127, Plain Ends (PE). We also stock a full range of ISO stainless steel backing flanges to complement our range of pressed collars.
Special Metric Materials can supply ISO stainless steel pressed collars in the following Grades: 304L (1.4307), 316L (1.4404) & 316L High Moly (1.4432).
ISO stainless steel pulled tees are used to form a branch in a piping system, to redirect the liquid flowing through the pipe.
ISO stainless steel pulled tees can either be equal or reducing. An equal ISO pulled tee has the same diameter as the main pipe it is connected to. In comparison, an ISO reducing tee features two outlets that cut at 90° to the main run pipe.
Typically, the ISO stainless steel pulled tees that Special Metric Materials supplies are manufactured to EN 10253-4/EN 10253-3. ISO stainless steel pulled tees manufactured to EN 10253-4 have a weld factor of z=1 & are rated to a higher pressure capability.
Special Metric Materials can supply ISO stainless steel pulled tees in the following Grades: 304L (1.4307), 316L (1.4404) & 316L High Moly (1.4432).
An ISO stainless steel 1.5xD 90° elbow is a fitting that can connect two metric pipes of the same size. Depending on the specific product and dimension required, ISO stainless steel 1.5xD 90° elbows are manufactured from tubes, sheet or strip.
The ISO stainless steel 1.5xD 90° elbows for Pressure Purposes that Special Metric Materials typically supplies are manufactured to EN 10253-4/EN 10253-3. Elbows manufactured to EN 10253-4 have a weld factor of z=1 & are rated to a higher pressure capability.
Special Metric Materials can supply ISO stainless steel 1.5xD 90° elbows in the following Grades: 304L (1.4307), 316L (1.4404) & 316L High Moly (1.4432).
ISO stainless steel tube is an essential piping product utilised across many different industries, including the renewable energy and building services.
Special Metric Materials stocks and supplies ISO stainless steel tube for Pressure Purposes, produced in accordance with EN 10217-7, with a weld factor z = 1.0. We can supply ISO stainless steel tube, pickled, in 6m random lengths, with Plain Ends (PE).
Tolerances of our ISO stainless steel tube are in accordance with EN ISO 1127.
The design pressures are calculated in bar according to: EN 13480, EN 10217-7 or EN 10296-2, T = 20 °C, actual weld factor z.
Special Metric Materials can supply ISO stainless steel tube in the following Grades: 304L (1.4307), 316L (1.4404) & 316L High Moly (1.4432).
Tru-Bore® Metric Tube is a type of piping used in many different types of industries, from pulp and paper, to chemical, petrochemical, water & wastewater treatment.
Special Metric Materials stocks and supplies stainless steel Tru-Bore® metric tube for Pressure Purposes, produced in accordance with EN 10217-7, with a weld factor z = 1.0.
We can supply welded tubes, pickled, in 6m random lengths, with Plain Ends (PE).
Tolerances of our stainless steel Tru-Bore® metric tube are in accordance with EN ISO 1127.
The design pressures are calculated in bar according to: EN 13480, EN 10217-7 or EN 10296-2, T = 20 °C, actual weld factor z.
Special Metric Materials can supply stainless steel Tru-Bore® metric welded tube in the following Grades: 304L (1.4307), 316L (1.4404) & 316L High Moly (1.4432).
Tru-Bore® is a registered trademark of OSTP.
Special Metric Materials is Covid 19 compliant.
